This product is no longer promoted on Made-in-China.com. If you find any infringement or
sensitive information of it, please contact
us for
handling. Thank you.
This type has become the preferred Check Valve configuration for outfalls. Designed for in-structure and end-of-pipe installations, This type features a flat bottom and flared top. This allows the valve to be installed at a lower overall elevation than other configurations, with less bottom clearance required. This is especially important in low-lying areas where maintaining as much driving head is critical, or where silt, sand and debris might tend to collect beneath the valve. This type is ideal for manhole applications, such as junction boxes, diversion chambers and interceptors, where the invert of the pipe is close to the floor of the vault. These vaults are designed to maximize the available gravity head, thus the invert pipe is as close to the floor as possible. This type allows installation in such structures and is easily retrofitted to existing structures, often replacing failed flapgates. There is no need to break up the concrete floor to provide bottom clearance. This type installs by slipping over the end of an exposed piece of pipe, and is fastened with compression clamps. The inside diameter of the product's cuff is fabricated to exactly match the outside diameter of the pipe.
Features
Reliable backflow prevention
Minimal bottom clearance required
100% elastomer construction eliminates maintenance
Will not corrode, warp or freeze open or shut
1"-2" cracking pressure, low headloss
Curved bill enhances sealing around debris
Custom built for each application based on pressure and flow conditions
Available in diameters from 4" (100mm) to 102" (2550mm)